Eaglepicher Technologies, LLC

Skip to content

1SE43 Gas Bottle Cutter

1SE43 Gas Bottle Cutter
The 1SE43 is a modified piston actuator in which the piston is a cutting blade. It is used to sever a stainless steel tube and release gas from a storage bottle. This .95-amp/ 1-watt device with RF attenuation has been qualified.
Characteristics Some of the characteristics listed here are nominal; others are levels to which the units have been tested. They are not limits on design capabilities. Please consult an EaglePicher representative before using this data as a specification.
Variations Although the 1SE43 was designed for a specific application, EaglePicher can adapt it for other uses. The header shape, piston stroke and output can be modified without losing RF and electrical properties. RF protection can also be eliminated.

1SE192 Wire Cutter

1SE192 Wire Cutter
The 1SE192 wire cutter is an electrically initiated pyrotechnicpowered device designed to cut electrical or other small-diameter wire. The cutter is compact, lightweight, highly reliable and functions in less than 10 milliseconds. It has been used extensively in aerospace applications.
Characteristics Some of the characteristics listed here are nominal; others are levels to which the units have been tested. They are not limits on design capabilities. Please consult an EaglePicher representative before using this data as a specification.
Variations The 1SE192 has been produced with several ignition systems which fire at different firing energy levels. Other variations are possible in cutting capability, environmental, resistance and firing characteristics.

EP-600-1 (1-Amp/1-Watt) Puncturing Cutter

EP-600-1 (1-Amp/1-Watt) Puncturing Cutter
The EP-600-1 is a pyrotechnic actuated cutter specifically designed to puncture a steel disc and release gas from a cylinder. The cutter ram is reduced in diameter below the cutting head to provide a specified gas-relief opening after operation. Internal gas pressure, combined with an excellent seal, maintains the cutter in extended position. Extremely rugged in construction, the cutter can be used in any application where strength and output power are important in providing linear motion.
Characteristics Some of the characteristics listed here are nominal; others are levels to which the units have been tested. They are not limits on design capabilities. Please consult an EaglePicher representative before using this data as a specification.
Variations EaglePicher can design and manufacture variations of the EP-600-1 to meet customer requirements.

You are here: Home

Energetic Devices

Cutters

Top

Skip to content